DIY: Wine bottle charms

All my friends are winos, and like me, most are college students. We fit into the “winos on the cheap” category. While I often find myself gifting bottles of wine, they typically cost around $10-15.

Throwing a wine charm on is my way of saying, “I love you but I’m broke. This wine was cheap, but here’s something pretty to prove I was thinking of you on _________(insert occasion here).”

2015-05-08 17.11.01

Supplies:

  • Wire (20-24 gauge will work best. If you use anything larger, it mind bend funny)
  • Beads
  • Charm (I used stone beads attached with a wrapped loop)
  • 1 Jump ring
  • Pliers
  • Wine bottle
  • Extra wine bottle (optional–wine crafts make me want wine)

Here’s a handy visual in case you’re not familiar with wire gauges:

The break down:

  1. Pick out a few beads or charms that will fit on the wire. Attach charms using a jump ring.
  2. Measure the wire around the bottle. You want it to sit on the top of the shoulder of the bottle so it won’t fall off. Leave about one inch extra and trim.                                    2015-05-08 17.14.21
  3. On on end, bend the wire into a “u” shape going outward (use about 1/2″). Bend the other end into a “u” going up (use the other 1/2″). Hook together around the neck of the bottle.                                                                               2015-05-08 17.20.14
  4. Reward yourself with a glass of wine! (Make sure it’s from a different bottle!)
2015-05-08 17.22.32

Apologies for the poor quality photos. I have shaky hands and (as far as I know) there’s not an app for that!

Advertisements

DIY: Ring bracelet

As I mentioned in my last few posts, I lost my camera cord so I can’t upload photos. While I’m writing this, I am laughing at myself. Why? Because I lost it while spring cleaning. Only I could pull off losing things while trying to get more organized. I’m not a big fan of my iPhone camera, but it will do while I reluctantly order a new cord on Amazon. Just be warned: I am a terrible phone camera photographer. Excuse the poor quality.

So on to the topic of ring bracelets. These are also known as slave bracelets, but I will not refer to them this way. (If you want to know why, check out my post from a few weeks ago.)

I think it’s safe to say I’ve made a bajillion of these. I gave most of them away already but I kept my favorite. It gets tangled easily so it’s a little high maintenance, but I love it just the same.

2015-05-07 21.43.14

This one takes quite a bit of planning, measurement and chain (which I’m running low on), so for this DIY I’ll stick to a more basic ring bracelet.

Supplies:

2015-05-07 21.08.30

  • Chain
  • Headpin or eyepin
  • 2-3 jump rings
  • Clasp
  • Bead (you can use any bead or trinket for this DIY–I would suggest something that will sit flat)
  • Pliers (I used round nose, bent nose and wire cutters)
  • Ring (optional)

The set-up:

  1. Measure the ring portion by draping chain around your middle finger. Do not make this tight or it will be hard to put on and will pull when you wear it. Meet the chain ends directly under your knuckle and trim excess chain with wire cutters.
    1. Note: you can use an actual ring hear if you prefer. Attach to chain using a jump ring and bend it tightly to fit the ring.
  2. Slide bead onto headpin/eyepin and loop each end to secure. I originally attached ends to chain using jump rings (as in photos), but I didn’t like how it looked. Instead, I hooked the loops directly onto the chain.
  3. Measure the bracelet part by attaching the end of the chain to the bead piece and wrap around your wrist. Leave a finger or two worth of room and snip with wire cutters.
    1. If you are making this for someone else, use their wrist or ask to borrow a bracelet. 
  4. Attach clasp on one end and jump ring on the other.
  5. Bask in the compliments and jealous glances directed at your masterpiece!

2015-05-07 21.17.22 2015-05-07 21.19.00 2015-05-07 21.21.00 2015-05-07 21.31.13

DIY: No clasp charm necklace

With all the thrifting and digging through my mother’s jewelry box that I’ve done, I have quite the collection of charms.This is probably my favorite DIY necklace project because it requires less materials and finally puts some of those charms to use. Plus, long necklaces are the best ever. Overstatement? I think not. You can layer them or wear them alone, and they can take jeans and a t-shirt to the next level.

Supplies

  • 2 charms (mine were from old clip-on earrings)
  • 3 jump rings
  • chain
  • Wire cutters, 2 pairs of pliers (flat nose and long or bent nose)

The breakdown

  1. Measure how much chain you need by draping it around your neck. Find the length you like each end to hang at and trim the rest with wire cutters. I like one end longer than the other, but you can make them even if you prefer. Although if you make them the same length, it might look like a bolo tie.
  2. Using your pliers, attach one charm to each end with jump rings.
  3. Connect the chains about half-way down using a jump ring. Make sure you can still pull the necklace over your head.

Go crazy with it! This DIY project can use any kind of charms, pendants, knickknacks. If you use something without an existing loop, you can attach it using a headpin and a wrapped loop, like in my beginner necklace project.

(Note: In my spring cleaning madness, I misplaced my camera cord. Pictures coming soon!)

DIY: Super simple chain tassels

I must admit something. Every time I go to write a DIY post, I want to title it a variation of “super simple,” “easy,” “beginner,” etc. And I probably have, so sorry if it sounds repetitive. I just really wanted to express that this is truly a beginner blog, with projects that anyone can do. If I reference a technique or even a type of pliers, I will typically link to a resource–mine or elsewhere on the interwebs–to guide you through the DIY.

That being said, here is a super simple way to make tassels you can use for earrings or necklaces. Tassels are my favorite. Any time I get stuck on how to finish a pair of earrings, I add tassels and suddenly they look thought out and complete.

My tassel-making method is pretty rough and tumble, and this would be a great opportunity to use scraps of leftover chain. I don’t measure the chain because I like the lengths of each piece to be a little different. You can measure if you prefer.

Open a jump ring and slide on the end of a piece of chain. At the length you would like the tassel to be, fold the chain and slip the top link onto the jump ring. Save your cuts until the end to make sure you like the way it looks. Continue until you fill the jump ring or you’re happy with the tassel.

Close the jump ring and whip out your wire cutters. Cut a link off the bottom of each connected piece to separate them.

(Note: In my spring cleaning madness, I misplaced my camera cord. Pictures coming soon!)

Update: Tassels were a trend at the Met Gala earlier this week (May 5)!

DIY: Stone pendant necklace

In my Thrifty Tuesday post yesterday, I included a photo of some stones I found at a vintage store in Dallas. I couldn’t wait to do something with them, so I came up with a way to make them into pendants. You could do this with any stone you find.

Supplies:

  • Stone
  • Chain
  • Glue (preferably clear glue–I used a hot glue gun and it turned out messy)
  • 1 head pin
  • 3 jump rings
  • Lobster or other clasp

IMG_7585  IMG_7598

Making the pendant

  1. Wrap a scrap of chain around the top of your stone.
  2. Slip head pin through chain on the back and twist ends into a wrapped (or simple) loop at the top.
  3. Secure chain and loop with glue.

Attach pendant to chain and complete with the lobster clasp and jump rings. I also fastened a circular charm with my initial that I found in a vintage store. I only had hot glue, so the back of mine looks a little rough.

IMG_7600  IMG_7597

A clear glue like Gorilla Glue or Super Glue would probably work better. I used about 18″ of chain, so mine hangs about mid-chest. This pendant would also work on a 20-30″ chain.

Spring Break seashells

2015-03-16 13.34.56  2015-03-16 13.35.53

I get so happy every time Spring Break rolls around. I’m graduating in May so this was my last year to have that glorious week away from campus and feel reinvigorated by sunshine after spending weeks under fluorescent lighting in the library. I admit, that’s a little dramatic and I really don’t spend that much time in the library.

Regardless, I spent last week in Galveston collecting seashells, sipping drinks with cheesy tropical names and freezing my limbs off in the cold March water. I came back with an angry sunburn, a sack full of shells and an itching to make something.

IMG_7442

I posted yesterday about using atypical materials, with things found in nature being one of them. The thing about natural items is that they sometimes smell or contain still-living organisms. Especially seashells. This was my first time crafting with shells, so there might be better ways of cleaning them. This method worked just fine for me:

Supplies:

  • Shells
  • Saucepan or stockpot, depending on amount of shells
  • Spoon or utensil to stir (don’t use anything wooden, as you will definitely want to put this in a dishwasher)
  • Fine mesh strainer
  • Bleach (I used a bleach-based kitchen cleaner)
  • Sponge
  • Clear nail polish (colored if desired)

Sanitize your shells:

  1. Put the shells in the saucepan and cover with water. Boil for 5-10 minutes, stirring occasionally. Drain in a strainer. This might smell really, really bad depending on where you collected the shells.
  2. Move them to a bowl and fill with equal parts water and bleach. Leave overnight.
  3. Pour back through the strainer. Scrub the shells to remove the bleach. I used a little dish soap to help with the smell, and scrubbed over a plastic bag to catch any broken pieces.

IMG_7448  IMG_7454IMG_7470

4. If there are still barnacles or thin layers on your shells, you’re going to want to get rid of them. I used a pair of jewelry pliers to pick them off (make sure to sanitize after).

IMG_7483

5. Lay out to dry, then paint with clear nail polish. My shells lost a lot of color in the washing process, so I painted some with colored nail polish before adding a clear topcoat.

6. Some might contain natural holes (convenient!). For those that don’t, you will probably need a drill. I used a hammer and small nail, but I would not recommend this if you’re attached to any of the shells (a few broke).

IMG_7486

And here’s what I made…

IMG_7502 IMG_7541

DIY: Beginner necklace

For me, thrift store hunting often results in finding interesting beads. They’re everywhere. In this post, I’m going to show you how to make a basic necklace using chain and a single bead. This is a great project because you can make any bead into a charm and swap them out to match your outfit or mood. This is a very basic, beginner necklace so it might be too easy if you have jewelry making experience. Now for the fun part:IMG_7409

Supplies

  • Interesting bead
  • 3 jump rings
  • 1 head pin
  • Chain, approx. 16″ long
  • Lobster claw or other style clasp
  • Wire cutters, round nose and bent nose pliers

Making the charm

  1. Put the head pin through the bead. Leaving a little space above the bead, use the bent nose pliers to bend the head pin to a 90 degree angle.
  2. With the round nose pliers, pinch the head pin at the bend and loop the pin around it.
  3. Use the bent nose pliers to wrap the end around the space between the bead and the loop. Clip extra wire with your wire cutters.

IMG_7418 IMG_7421 IMG_7425

This is called a wrapped loop. Alternatively, you could make the charm using a simple loop but I like the look of wrapped loops for this necklace.

Chain necklace

  1. Attach a jump ring on one end of your chain, and a jump ring and lobster clasp on the other.
  2. Connect the charm to the chain using a jump ring.
  3. Voila, you’re finished!

IMG_7426 IMG_7431 IMG_7440

DIY Button studs

This will be just about the easiest DIY you will ever do, and will take all of five minutes. For my supplies, I used buttons from a bag I bought at a vintage store. I have also used this method to make clip-on earrings into studs. I find clip-ons to be just about the most uncomfortable accessories ever. How did people ever wear clip-ons anyway?  

IMG_7364

Supplies:

Instructions:

Using your handy-dandy wire cutters, clip off the button shanks and try to get the back as flat as possible.

IMG_7367 IMG_7370

Put a dot of glue in the center of the back of the button and press on an earring back. Pick of any excess glue.

IMG_7374 IMG_7376

Done! See, wasn’t that easy?

IMG_7399

Frankie Says Macramé: Easy How-to

In my last post, I mentioned using macramé to loosen up. There are many different patterns, but I am going to show you a basic bracelet pattern. These make for awesome homemade gifts or look great stacked. Here we go:

IMG_7205

Supplies:

  • String (yarn or twine is okay, but is sometimes hard to work with. I use hemp cord, which you can find in the jewelry aisle of craft stores)
  • Scissors
  • Tape
  • Hard surface
  • Beads (optional)
  • Wine (optional)

The basic set-up:

  1. Measure about one yard* of cord and fold in half. Put a piece of tape about two inches from the top. Tape the two hanging strings near the bottom to hold in place. (This will be string “A”)
  2. Measure another three yards of cord and tie a knot under the tape, leaving the two hanging ends even.
  3. Pull the right end (string “C”) across A and underneath the left end (string “B”).
  4. Pull B underneath A and C.
  5. Pull ends to form a knot.
  6. Repeat the process, this time bringing B across A to the right side and pulling C through to form a knot. Continue forming knots, alternating between the right and left side.

*All measurements are approximate. 1 yard = nose to fingertip, 1 inch = middle portion of index finger.

1  2  3

4  5  6

Adding beads

Simply string beads on A and continue knotting.

bead

Finishing up

When knotted part fits around your wrist, you’re ready to tie it off. The easiest way to do this is to knot the end around itself and use the loop as a closure, but I prefer a more finished look. Your other option is to make a sliding closure:

  1. Tie each end onto itself and right against the knots (on one end you will still have four strings, so tie all and trim the ends of the two shortest ones). Tie a regular knot on the ends.
  2. Tape the strings next to each other.
  3. Use a short piece of cord and make a few macramé knots (10-15) around the four strings. Tie off with two regular knots and trim the ends.

11 12 13

Your bracelet is ready to go! Adjust the slider to fit your wrist and tuck in the loose strings.

b

a